Product pages
The lines I detail, in depth
These are the pages where I have gone through the manufacturer’s own spec sheets and put the numbers on one screen - lumens, wattage, optics, finishes, controls, warranty, and what actually matters on a South Florida job. Every figure on these pages comes from the maker’s published literature; where something is not published, the page says so. I represent these lines for Miami-Dade, Broward, Palm Beach and Monroe.
- 22 product pages
- Spec sheets on the page
- Manufacturer figures only
- Florida energy code
- Salt air and HVHZ
- Sea turtle coast
- Miami-Dade / Broward / Palm Beach

How to use these
Start with the fixture type, not the brand
Most people land here with a fixture type in mind - a downlight, a track head, an area light, a linear pendant - so the pages are grouped that way below. If you already know the brand, the full SESCO line card lists all 163 lines I can quote, and browse by category works from the application end. If what you need is not on a page yet, send me the project anyway - the page not existing says nothing about whether I carry the line.
Every page follows the same shape: what the family is, the published performance table, optics and controls, the Florida section, where I specify it, and the spec sheets to download. Manufacturer claims are attributed to the manufacturer.
Indoor and architectural
Track, linear and 3D-printed
Interior lines where the detail work is in the optic, the aperture and the dimming.




Site and outdoor
Area, roadway, decorative and landscape
Outdoor is where Florida bites - salt air, hurricane attachment, the turtle coast and the energy-code reduction rules all land on the same schedule.




Recessed downlights
Apertures, housings and trims
Three lines that solve the same problem three different ways — the module-and-trim system, the deep-cell aperture, and the shallow-plenum housing.



Controls
Code compliance, and what happens after the lights are on
Florida Building Code Energy Conservation drives most of this - occupancy sensing, daylight response, time switches, and the exterior reduction rules. See the energy code page for the requirements themselves.


Healthcare, behavioral and sealed environments
Where the fixture has to survive the room
Ligature resistance, washdown, cleanroom, tunnel and parking structure - the categories where the housing matters more than the lumens.
The rest of the line card
These pages are the deep ones, not the whole list
I quote 163 lines through SESCO Lighting. The pages above are the ones where I have done the full write-up; the line card has an entry for every line with the categories it covers and the spec table for South Florida. If you want a page built for a line you use often, tell me which one and I will do it next.
For code questions rather than product questions, start with the Florida energy code, sea turtle lighting, HVHZ exterior or the Broward outdoor ordinance.
Questions
About these pages
Are these all the lines you carry?
No. These are the lines with a full product page written. I quote 163 lines through SESCO Lighting - the line card lists all of them. If a line is not on this page, ask anyway.
Where do the numbers on these pages come from?
The manufacturer’s own spec sheets and product pages, and nowhere else. Where a figure is not published - a lead time, a warranty term, a certification status - the page says it is not published rather than guessing. Spec sheets are linked on every page so you can check.
Do you sell these fixtures?
No. I am the manufacturer’s representative for these lines in Miami-Dade, Broward, Palm Beach and Monroe. I detail the job, run the photometrics, quote through the distributor of your choice and handle submittals and site issues.
Can you do a photometric layout?
Yes. Send me the site plan or the floor plan with ceiling heights and I will run the layout and give you the calculation with the fixture schedule. Send me the project and I will come back with a layout.
Which counties do you cover?
Miami-Dade, Broward and Palm Beach, plus Monroe. If your project is elsewhere in Florida I can point you at the right SESCO office - the rep directory lists them.
Next step
Send me the project
Plans, a fixture schedule, or a photo of what is there now - any of the three is enough to start. I will come back with product, photometrics and pricing.
