Skip to Content

Product · Visionaire Lighting · a SESCO line

Visionaire Lighting: Area, Flood, Bollard and the 590 nm Turtle-Safe Range

Visionaire Lighting has been building specification-grade exterior LED since 2000, with published capability in injection molding for optics, surface-mount PCB and light-source production, die, steel and sand casting, powder coating, CNC robotic fabrication and metal spinning. On this coast it earns its place two ways: a deep published optics matrix on the area families, and one of the broader amber wildlife ranges on my card.

Have a site plan to lay out, a turtle-code parcel, or an EPA to check against a pole?

Company and warranty, as published

Visionaire Lighting published company and warranty data
CompanyVisionaire Lighting, LLC. Corporate address 3780 Kilroy Airport Way, Suite 650, Long Beach, California. The about page describes Rancho Dominguez, California as headquarters with a 60,000 sq ft facility, and also names a facility in Ensenada, Baja California, Mexico
In business since2000
Warranty, LED fixtures and LED enginesFive years
Warranty, Array technology, electricalTen years
Warranty, OEM LED driversFive years
Warranty, non-LED productsTwo years
Warranty, finishThe warranty document publishes two years. The spec sheets publish a five-year limited warranty on the entire system including finish. Visionaire publishes no reconciliation, so get the finish term in writing for a coastal job
Warranty, VisionBarReplaced if 25 percent of the individual LED diodes fail
Warranty territoryUnited States and Canada. Elsewhere, no implied warranty unless separately documented
Warranty exclusionsPhotocells, sensors, non-Visionaire equipment, labor and installation, fatigue failure or similar phenomena resulting from induced vibration, improper installation, overloading, misuse, and existing foundations. Void if flags, banner arms, banners, streamers or ropes are added
Domestic contentNo Buy American Act, Build America Buy America or Made in USA statement is published, and the about page names both a California and a Mexico facility. On a federally funded job this has to be settled in writing first

The families, as Visionaire names them

Visionaire published product families
V SeriesVLX, VMX-II, VSX-II, VSC-II, VMS, VMF, VSF, the Array versions, V-Bollard and V-Arch Bollard — published as spanning general site lighting through building and sign lighting
BOW-IIBOW-1, BOW-2, BLX-II and BSX-II, plus the BOW LX II and BOW SX II Array versions. Wall, ceiling and area
LussoOrnamental post top and arm mount — Large and Medium Post Top, Large and Medium Arm Mount, and Lusso Bollard, with Serenity Lens and Turtle Safe variants
PremierPremier 2 L and Premier 2 M architectural area, each also offered with a Serenity Lens
PG CollectionSquare and round site, area and wall or ceiling — PGS-1/2/3, PGR-1/2/3, PGS-S, the CM ceiling-mount versions, PGRS and PGAS
OdenOden, Oden Array, Oden Array Sconce and Oden Roadway in ODN-1-L, ODN-2-L and ODN-3-L
VokeyThe newest published collection — Vokey Archline and Vokey Bollard
Roadway and ornamentalOden Roadway, PRK, New Orleans II, Apex, Cross Bow Architectural, Pavilion II
BollardsLusso Bollard, V-Bollard, V-Arch Bollard, Vokey Bollard and Endurascape concrete
Not publishedNo high mast family and no sports or stadium luminaire family exists in the catalog. PRK is published as suitable for parking garages, and PGA-1 CM sits under wall and ceiling for garage use, but there is no family named garage or canopy

Published performance, family by family

Where Visionaire publishes a family-wide range covering two or more sizes, that range is repeated here rather than split.

Visionaire published lumens, wattage, color and listings
Family or modelTypePublished output and wattagePublished colorPublished optics, EPA and listings
VLX-1Area and site15,708 to 87,000 lm; 98.6 to 628.8 W; 86 to 180 lm/W, 143 average2700K, 3000K, 3500K, 4000K, 5000K; 70, 80 or 90 CRI17 IES patterns from T1 to T5WR plus flood, automotive, forward throw and low glare. BUG B1-5 U0 G1-5. EPA 1.0. 58 lb. cUL listed; IP65; IDA certified at 3000K or lower, fixed mount
VMX-IIArea and site7,000 to 50,000 lm; 49 to 362 W; 142 average, up to 183 lm/W2700K to 5000K; 70, 80 or 90 CRI17 IES patterns. BUG B0-5 U0 G0-5. EPA 1.25. 49 lb. cUL listed; IP65; IDA at 3000K or lower, fixed mount
VSX-IIArea and site2,300 to 23,000 lm; 16 to 181 W; efficacy not published2700K to 5000K; 70, 80 or 90 CRIT1, T2, T3, T4, T4 Automotive, T5, T5W, T5WR. EPA 0.58. 25 lb. UL listed; DLC listed; IP65
VMF-1Flood7,230 to 26,017 lm; 52 to 219 W; 108 to 148 lm/W3000K, 4000K, 5000K; 70 CRIFlood Narrow, Flood Medium, 7x5, 7x7. EPA 2.47. 45 lb. cUL listed; DLC listed on some configurations; IP66
VSFFlood2,000 to 21,000+ lm; 16 to 181 W2700K to 5000K; 70, 80 or 90 CRI7x7, 7x5, Flood Narrow, Flood Medium. UL listed; DLC certified; IP66. EPA and weight not published
VSC-IIWall and ceiling2,300 to 23,000+ lm; 16 to 181 W2700K to 5000K; 70, 80 or 90 CRI17 optical distributions. DLC listed; IP65. Wet-location wording, EPA and weight not published
BOW-1 and BOW-2Wall and ceiling4,095 to 17,336 lm and 35 to 142 W across both sizes; 95 to 140 lm/W3000K, 4000K, 5000K; 70 CRIT1 through T5WR. BUG B0-4 U0-4 G1-4. 18 lb and 22 lb. ETL listed; DLC listed; IP66
Premier 2 MArchitectural area2,117 to 13,086 lm; 18 to 106 W; 102 to 136 lm/W3000K, 4000K, 5000K; 70 CRIT1 through T5WR. BUG B1-4 U0 G1-2. 37 lb. cUL listed; DLC listed; IP66
PGS-1Area and site2,032 to 13,690 lm; 18 to 107 W; 105 to 144 lm/W3000K, 4000K, 5000K; 70 CRIEight types including T4 Automotive. BUG B0-4 U0 G0-2. EPA 0.70 to 1.78. 20 lb. cUL listed for wet locations; DLC listed; IP65
PGS-SArea and site, small2,300 to 7,400 lm; 20, 30, 40 or 50 W2700K to 5000K; 70, 80 or 90 CRITen IES distributions. 13 lb. cULus certified, UL wet-location listed; IP65
PGA-1 CMWall and ceiling, parking garage2,300 to 15,000 lm; 18 to 107 W2700K to 5000K; 70, 80 or 90 CRIT1 through T5WR. UL listed; DLC rated; IP65
PRKParking garage3,000 to 13,900 lm; 25 to 115 W3000K, 4000K, 5000KType 1, Type 5 Long Round, Type 5 Long Square. UL listed; DLC certified; IP65 and IP66 available
Oden Roadway ODN-1-L, ODN-2-L, ODN-3-LRoadway2,561 to 32,619 lm and 18 to 274 W across the three sizes; 110 to 144 lm/W3000K, 4000K, 5000K; 70 CRISix IES patterns T1 to T5W. BUG B0-3 U0 G0-2. EPA 1.2 to 9.8 across sizes and mountings. 40, 53 and 74 lb. cUL listed for wet locations; DLC listed; IDA at 3000K; IP65
Lusso Bollard LSO-BBollard919 to 5,028 lm; 13 to 45 W; 62 to 120 lm/W3000K, 4000K, 5000K; 70 CRIT1 through T5W. BUG B0-2 U0-1 G0-3. 15 lb. cUL listed for wet locations; DLC qualified; IP65
Vokey Bollard VKB-1Bollard1,295 to 7,391 lm; 20 to 60 W; 87 to 137 lm/W2700K to 5000K; 70, 80 or 90 CRITen IES types. BUG B0-2 U0 G0-3. EPA 1.21 to 5.01 single, 1.37 to 4.53 double. 35 lb. IP66. cUL published as pending — confirm before an AHJ submittal
New Orleans II Dark Sky FriendlyOrnamental acornLumens and wattage not published3000K, 4000K, 5000K; 70 CRIT1, T3, T4, T5W. 41 lb. ETL listed; IP65

Turtle safe: what Visionaire publishes, and the one thing to settle in writing

This is the reason Visionaire comes up on a beachfront parcel in Broward, Palm Beach or Monroe. The LED is published as True Amber AlInGaP at 590 nm, supplied as standard on the turtle-safe models, and there is a published Turtle Safe Hybrid option that runs amber during nesting season and white light off season, with custom shielding on request.

Visionaire published turtle-safe and wildlife models
Light sourceTrue Amber AlInGaP LEDs, published wavelength 590 nm, supplied as standard on the turtle-safe models
Area and siteBLX-II-3, BLX-II-4, BLX-II-6, BLX-II-8; BSX-II-2, BSX-II-3, BSX-II-4; VLX-1, VMX-1, VSX-1
Wall and ceilingBOW-1, BOW-2, VSC-II, PGA-1 CM, PGAS-1, PGAS-2, PGRS-1, PGRS-2
Post top and architecturalLusso Medium Post Top LSO-M-PT-LD-TS, Premier 2 L
Square and round sitePGS-1 Turtle Safe, PGR-1 Turtle Safe, PGR-1 CM Turtle Safe
BollardEndurascape Turtle Safe, published at 20 W or 32 W, Type III and Type V, IP65
Published sample data, BLX-II9,925 lm at 278 W with 256 LEDs at 350 mA; 28 to 36 lm/W; BUG B2-5 U0 G1-3; distributions FM, FN, T1 through T5WR; 45, 54, 68 and 96 lb; cUL listed suitable for wet locations; IP65 with IP67-rated optics; LM-79 and LM-80
Published sample data, Lusso Medium Post Top Turtle Safe2,299 to 2,432 lm at 32.9 W (350 mA); 3,403 to 3,599 lm at 50.7 W (530 mA); 68 to 74 lm/W; 16 IES types; 30 lb single, 32 lb double; cUL listed for wet locations; IP65; L70 published as exceeding 100,000 hours at 530 mA
Related dark-sky credentialIDA certification available at 3000K or lower with fixed mount on VLX-1, VMX-II, Oden Roadway and the Lusso post top. New Orleans II is published as Dark Sky Friendly

One thing to settle before a coastal submittal: Visionaire’s turtle-safe solutions page states that listing with the Florida Fish and Wildlife Conservation Commission is currently pending, while the turtle-safe brochure and the Lusso Turtle Safe spec sheet carry Certified Wildlife Lighting and Wildlife Certified designations. No FWC certification number is published for any model. On a parcel where the permit turns on an FWC-certified fixture, I get the current certification in writing from the factory before it goes on the schedule rather than reading it off a brochure. The turtle-safe fixture finder and the sea turtle code page cover what the rule actually asks for.

Coastal, wind and code

Visionaire published coastal and structural data
FinishQuali-Guard textured, chemically pretreated thermoset polyester powder coat, electrostatically applied, oven-baked at 400 °F on the poles and bases document
HousingsPublished as corrosion-resistant cast aluminum
Coastal optionAn optional Zinc-Free Primer, published with the note that it is recommended within three miles of the ocean. On the Vokey Bollard it is described as an optional zinc-free marine-grade primer
Salt spray, ASTM B117Not published. No hour count appears on any spec sheet, on the poles and bases document, or in the warranty
EPAPublished per model in square feet, and for some families per mounting and per tilt angle
Wind speed ratingNot published. No AASHTO, ASCE 7, gust factor, risk category or pole wind-load table is published, including in the poles and bases document
Miami-Dade NOANot published
Florida Product ApprovalNot published
Impact ratingNo IK rating published on any product reviewed
VibrationNo ANSI C136.31 rating published, while the warranty excludes fatigue failure resulting from induced vibration

Read the published EPA as an input to a separate pole calculation, never as a wind rating for the assembly. The EPA calculator and the HVHZ page are the next two stops.

Controls

Visionaire published controls options
Dimming0-10V driver supplied as standard on VLX-1, VMX-II, VSX-II, VMF-1, Lusso Bollard, PGS-1, Oden Roadway and Vokey Bollard. Dim-to-off driver option published on VMX-II, PGS-S and VKB-1. ELV trailing edge published on VSF and VSC-II
PhotocontrolButton photocells PC-120, PC-208, PC-240 and PC-277; photocell and receptacle (PCR); 7-pin twist-lock receptacle for wireless control
DigitalDALI 2 driver on VLX-1; D4i on PGS-S and VKB-1; Zhaga 4-pin receptacle on VMX-II and Zhaga receptacles on PGS-S; DMX listed as a VLX protocol
Named platformsWattstopper and Wattstopper Plus (FSP-200 and FSP-600 series), Casambi Wireless, Synapse, Pangea wireless on New Orleans II, Visionaire wireless controls, and Zigbee on BOW
SensorsWSC-8, WSC-20 and WSC-40 by mounting height (to 8 ft, 9 to 20 ft, 21 to 40 ft), plus daylight and occupancy sensors and a Title 24 compliant motion sensor
Other published electricalVLX-1 publishes 10 kV surge protection standard, 90 percent power factor, THD 20 percent or less, minus 40 °C to plus 55 °C operating range, and L70 above 90,000 hours at 25 °C driven at 350 mA
Not publishedA percentage dimming range. Visionaire names the protocols but does not publish a minimum dim level anywhere reviewed

What Visionaire does not publish

These are the questions I take to the factory rather than guess at.

Visionaire unpublished items relevant to South Florida
Salt sprayNo ASTM B117 hour count anywhere. The only published coastal provision is the optional zinc-free primer and its three-mile rule of thumb
Wind and HVHZNo wind speed rating, no ASCE 7 or AASHTO basis, no Miami-Dade NOA and no Florida Product Approval
FWC certificationNo certification number published, and the site and the spec sheets say different things about whether listing is pending or complete
Turtle-safe color dataCCT and CRI are not published for the amber models, only the 590 nm wavelength — which matters if the ordinance is written around a wavelength floor
Full amber rangesOnly sample configurations are published for BLX-II and the Lusso post top, not a full lumen and wattage range
DLC product IDsDLC is claimed as listed or qualified with the caveat that some configurations may not be, but no DLC product ID is published, which is what a utility rebate check needs
Model-by-model detailEfficacy, EPA, weight and BUG are missing on several families, including VSX-II, VSF, VSC-II, PGS-S, PGA-1 CM and PRK
Impact ratingNo IK rating published, which matters on garage, bollard and vandal-exposed locations
Vokey Bollard listingPublished as cUL Pending. That will not pass an AHJ review as published
Wet-location wordingSeveral models publish only cUL Listed or UL listed without the wet-location wording that PGS-1, Lusso Bollard, Oden Roadway and BLX-II carry

Questions I get

Who represents Visionaire Lighting in South Florida?

I do, through SESCO Lighting, in Broward, Miami-Dade, Palm Beach and Monroe.

Is Visionaire turtle-safe lighting FWC certified?

Visionaire publishes both answers. Its turtle-safe solutions page says listing with the Florida Fish and Wildlife Conservation Commission is currently pending; its turtle-safe brochure and the Lusso Turtle Safe spec sheet carry Certified Wildlife Lighting designations. No FWC certification number is published for any model. If your permit turns on it, tell me and I will get the current position in writing from the factory before it goes on the schedule.

What wavelength are the Visionaire amber fixtures?

590 nm, published as True Amber AlInGaP, supplied as standard on the turtle-safe models. Visionaire does not publish CCT or CRI for those models, so if the ordinance is written around a wavelength floor rather than a certified-product list, that 590 nm figure is the number it turns on.

Does Visionaire publish salt-spray hours?

No. There is no ASTM B117 figure on any spec sheet, on the poles and bases document, or in the warranty. The only published coastal provision is an optional zinc-free primer, recommended within three miles of the ocean. On an oceanfront parcel I would either get the test data in writing or put a line that publishes it in the other column.

Can I use the published EPA as a wind rating?

No. Visionaire publishes EPA in square feet per model, which is an input to a pole calculation, not a rating for the assembly. There is no published wind speed, no ASCE 7 or AASHTO basis, no Miami-Dade NOA and no Florida Product Approval. Run the head load through the pole calculator and take the pole to its own published table.

How long is the Visionaire warranty?

Five years on LED fixtures and LED engines, ten years on Array electrical, five years on OEM LED drivers, two years on non-LED products. The finish term is published two ways — two years in the warranty document and five years on the spec sheets — so get it in writing for a coastal job. Coverage is United States and Canada only, and fatigue failure from induced vibration is excluded.

Where the numbers come from, and where to go next